Standards And Directives Complied With; Cpd Conformity And Firmware Version - Siemens 13-xx-ST-SBT Series Product Data

2 Safety

Standards and directives complied with

2.3 Standards and directives complied with
2.3.1
20
Building Technologies
Fire Safety
Disregard of the safety regulations
Before they are delivered, Siemens products are tested to ensure they function
correctly when used properly. Siemens disclaims all liability for damage or injuries
caused by the incorrect application of the instructions or the disregard of danger
warnings contained in the documentation. This applies in particular to the following
damage:
Personal injuries or damage to property caused by improper use and incorrect
application
Personal injuries or damage to property caused by disregarding safety
instructions in the documentation or on the product
Personal injury or damage to property caused by poor maintenance or lack of
maintenance
A list of the standards and directives complied with is available from your Siemens
contact.

CPD conformity and firmware version

In order to satisfy Directive 89/106/EEC (the Construction Products Directive –
CPD), the firmware of a newly installed fire detection installation must be current
market package version MP2.1 or higher.
NOTICE
Firmware version of a newly installed fire detection installation not updated
No CPD conformity
Compare the firmware version of a newly installed fire detection installation
with the firmware version MP2.1.
Update the firmware if necessary.
008837_q_en_--
14.05.2012