Table of Contents
Advertisement
10
Operating unit with PMI & mainboard FCM2004
Technical data
10.5
Supply input
Display
Interfaces
Connections
Mechanical data
82
Building Technologies
Fire Safety
After the firmware has been updated and before the restart, S38-2 must be in the
'OFF' position, otherwise the firmware is updated again.
S38-1 has an impact on starting the operation system.
Position S38-1
Function
ON
Station is started in Restore factory settings mode.
OFF
Station is started normally.
After the factory settings have been restored and before the restart, S38-1 must
be in the 'OFF' position, otherwise Restore factory settings mode is triggered
again.
S33: Switch for ground fault monitoring of the Ethernet connection
Both switches must be in the same position.
S33-1
S33-2
Function
ON
ON
Ground fault monitoring switched on
OFF
OFF
Ground fault monitoring switched off
OFF
ON
Not admissible
ON
OFF
Not admissible
Technical data
Voltage
Quiescent current (display illumination off)
Maximum current (display illumination on and
lamp test on)
Dimensions (L x W)
Resolution
Slots for serial options (RS232 or RS485
module)
Slots for network modules (SAFEDLINK)
Ethernet connection
Connections for peripheral data bus
Ethernet
Peripheral data bus
Dimensions (W x H x D)
Weight
DC 20...30 V
120 mA
200 mA
115 x 50 mm
256 x 112 pixels
For RS232 module for event printer
For RS485 module for ESPA-4.4.4
interface, FAT, FBF, UGA or remote
EVAC-NL operation
Full functionality (incl. degraded mode
function)
Degraded mode function only
10/100 Mbit/s
1
RJ45
Plug-type connection
427 x 200 x 25 mm
1800 g
008837_q_en_--
14.05.2012
Advertisement
Table of Contents
