Setting Areas Of The Acceptance Test - Siemens SINUMERIK Series Function Manual

Commissioning - acceptance tests
5.3 Sequence of an acceptance test
5.3.2

Setting areas of the acceptance test

"Overview" setting area
The "Overview" setting area is automatically activated after the acceptance test function is
called. In this setting area, you can either manually enter the required machine data, or load
the content of a template ("Load template" softkey) to the setting area.
The following machine data can be entered:
120
Navigation using the following softkeys
Press the "First test" softkey to display the first acceptance test.
Press the "Next test" softkey to display the following acceptance test.
Press the "Previous test" softkey to display the previous acceptance test.
In the "Finished" setting area, press the "Exit ATW" softkey.
This completes and closes the "Acceptance test" function.
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
Safety Integrated