Safety Integrated Overview - Details - Siemens SINUMERIK Series Function Manual

Other options
You can supplement or switch over the display in the "Overview" window:
● Using the "Safe drives" softkey, you can toggle between the displays of "All drives" and
"Safe drives".
● Using the "Confirm SI HW" softkey, you can confirm that hardware components have been
replaced after safety commissioning has been completed.
● You can change to the detailed view using the "Details (Page 59)" softkey.
● Using the "Checksums (Page 60)" softkey, you can change to the dialog, which shows you
the safety checksums.
3.7.3

Safety Integrated overview - details

The most important detailed information about the active safety functions is displayed in the
"Overview - Details" window:
Figure 3-3
● Extended functions:
For extended functions, the settings from parameter p9501 are evaluated and displayed
for enabled functions.
● Basic functions:
For the basic functions, the settings from parameters p9601, p9602, p9652 are evaluated
and displayed if the function has been released.
This part of the window is not displayed if no basic functions were set up.
Safety Integrated
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
Overview details
Commissioning - drive-based
3.7 Safety overview
59