3.9
Safety Integrated functions
3.9.1
Calling function dialogs
Procedure
Safety Integrated
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
1.
Select the "Start-up" operating area.
2.
Press the menu forward key and the "Safety" softkey.
3.
Press the "Functions" softkey.
4.
Press the softkey of the required safety function:
● STO/SS1 Basic
● SBC
● STO Extended
● SS2/SOS
● SLS
● SSM
● SAM
● SDI
● SLP
● SBT
5.
Select the required drive using softkey "Drive+", or "Drive-".
- OR -
Press the "Select drive" softkey.
This softkey is only visible if there are several drives.
A selection of all of the axes and drives that exist in the drive system is
displayed.
Select the required drive.
Press the "OK" softkey to complete the drive selection.
6.
Activate the commissioning mode if this has not already been done.
Commissioning - drive-based
3.9 Safety Integrated functions
71