Starting The Lmt - Huawei Airbridge BTS3606E Commissioning Manual

3 Commissioning Process
Operation Procedure
To configure the IP address and routing information of the BTS locally, do as follows:
Step 1 Log in to the BTS locally. See 3.3.2 "Locally Logging In to the BTS in Telnet Mode" for
details.
Step 2 Set the IP address of the BCIM by executing the command SET CBTSBCIMIP.
Step 3 Set the IP address of the FE port of the BCIM by executing the command ADD
CBTSFEPORT.
Step 4 Set the routing information of the BTS by executing the command ADD CBTSIPROUTE.
Step 5 Set the IP address of the BTS O&M by executing the command SET CBTSOAMIP.
----End

3.3.4 Starting the LMT

This section describes how to start the LMT.
Task Description
Log in to the BAM through the LMT.
Prerequisites
Before starting the LMT, ensure that:
Operation Procedure
To start the LMT, do as follows:
Step 1 Select Start > All Programs > iManager M2000 > LocalWS.
The Local NE Management System dialog box is displayed.
Step 2 Click Configure to add the IP address of the BAM.
Step 3 Select the BAM to be logged in to and click OK.
The system starts the service maintenance system automatically and the User Login dialog
box is displayed.
Step 4 Type in the valid user name and password, as shown in Figure 3-7.
3-12
The BTS is configured with the QC54BCIM.
The BAM server is operational.
The LMT is installed with the O&M software.
The network connection between the LMT and the BAM is normal.
The user name, password, and related authorities of the WS have been defined in the
BAM.
Huawei Technologies Proprietary
Airbridge BTS3606E&3606AE
System Commissioning Guide
Issue 02 (2006-10-10)