Locally Logging In To The Bts In Telnet Mode; Figure 3-5 Ip Address Of The Ws Used For Local Commissioning - Huawei Airbridge BTS3606E Commissioning Manual

3 Commissioning Process
Figure 3-5 shows the IP address of the WS used for local commissioning.

Figure 3-5 IP address of the WS used for local commissioning

Step 6 Click OK.
----End

3.3.2 Locally Logging In to the BTS in Telnet Mode

Task Description
Log in to the BTS locally by using the Telnet software.
Prerequisites
To configure the WS, ensure that the WS is in the same TCP/IP network as the BCKM.
Operation Procedure
To log in to the BTS in Telnet mode locally, do as follows:
3-10
If the WS is used for remote commissioning, the IP address is set according to the
requirement of the local network to which the WS belongs.
Huawei Technologies Proprietary
Airbridge BTS3606E&3606AE
System Commissioning Guide
Issue 02 (2006-10-10)