Navigation Overview; Operating Mode - ABB Navigator 550 Operating Instructions Manual

Navigator 500
Hydrazine analyzer

6.4 Navigation overview

Operator
Page 1
Diagnostics
View
Calibration
Log
Fig. 6.3 Menu navigation

6.5 Operating mode

In operating mode, values from connected wet-sections are displayed on Operator Pages. A maximum of 5 Operator Pages can be
displayed.
Operator Page 1 (the default page) displays values from all connected wet-sections simultaneously (a maximum of 4 wet-sections
can be connected). The remaining Operator Pages can be assigned to display values from individual wet-sections (in any wet-section
order). To achieve this, each wet-section must be associated with a template in the Configuration level / Display / Operator Templates
parameters – see page 44.
In Fig. 6.4, Operator Page 1 shows that 4 wet-sections are connected.
Instrument tag
(user-assignable)
Wet-section tag
(user-assignable)
Autoscroll icon –
scrolls each page
sequentially when enabled
Display icon –
see Section 6.10, page 37
*The highest priority diagnostic or alarm is displayed. Other active diagnostic / alarm states can be viewed on the Diagnostics
View – see page 30.
Fig. 6.4 Operator Page 1 (hydrazine multiple wet-section)
28
Operator
Operator
Page 3
Page 2
Signals Chart
View View
Alarm Audit
Log
Navigator
TAG 1
TAG 2
2.77 2.77
ppb
N2H4
No UNa
TAG 3 TAG 4
6.93 6.93
ppb
N2H4
In Configuration
NAMUR (NE107) Status Icons
Failure High Process Alarm
Maintenance Low Process Alarm
Out of Spec High Latch Alarm
Check Function Low Latch Alarm
Operator
Page 4
Alarms
View
Diagnostic
Log Log
2012–04–15
10 : 29: 17
4.28 4.28
ppb
N2H4
8.82 8.82
ppb
N2H4
CAL
Diagnostic message or alarm tag –
see Appendix A.1, page 63 for diagnostic messages
Operator
Page 5
Outputs
View
Time and date
Process value (PV)
Chemical units
Display icon –
see Section 6.10, page 37
OI/AHM550–EN Rev. A