Setting The Time - Silvercrest SWE 100 B1 User Manual And Service Information

Setting the Time

The time can only be set while the device is powered off. If it is still
powered on, press the On/Off button [8] to power the device off.
 Press and hold the TIME button [15].
 Then press the HOUR button [13] repeatedly to set the hour. You can
also keep the HOUR button [13] pressed down to accelerate the digit
adjustment. To distinguish ante meridian (morning) and post meridian
(afternoon) time for the 12-hour display, "PM" [27] will display for post
meridian clock hours.
 Keep the TIME button [15] pressed. Then press the MIN button [12]
repeatedly to set the minutes. You can also keep the MIN button [12]
pressed down to accelerate the digit adjustment.
 Release the TIME button [15] after the clock has been set correctly.
Use the 12H button [17] and 24H button [16] to change
between the 12- and 24-hour time display.
Please note that you should adjust the clock when you
move into a different time zone.
Multi-Band Tuner SWE 100 B1
English - 17