Mounting Solutions
Mounting Solutions
You can mount the Avalon CTS as follows:
• In a standard cart drawer. The base station with docked transducers fits into Philips Carts CL, CX and
CM.
Note: if you mount the base station in a cart or in such a way that the standard antenna cannot be
attached directly to the base station, or does not provide sufficient transmission range, use the antenna
extension mounting kit (M2720A Option K01).
• On a dedicated mounting shelf, forming part of the Avalon CTS mounting kit. Each kit comes with
complete system power from one single power cord, and the appropriate monitor interface cable is also
integrated, so that you do not require a separate interface cable:
Avalon FM20/30 Cart with Avalon CTS
mounting kit
• On top of carts, desks or other flat surfaces using the mounting brackets.
• In a wide variety of situations using the GCX mounting adapter for mounting the base station (order
directly from GCX, part number PH-0042-80).
• On top of Series 50 IX/XM/XMO fetal monitors using the mounting brackets.
To Purchase, Visit
Avobus.com
or call
1-800-674-3655
1 General Information
Series 50 Cart CL with Avalon CTS
mounting kit
7