Function Settings; Bed Label Appearance; Enabling/Disabling Fixed Frequency - Philips Avalon CTS M2720A Service Manual

8 Changing Settings

Function Settings

To change the function settings manually, follow the step-by-step instructions.

Bed Label Appearance

The bed label can be set to appear as two-digit numeric characters between 00 and 99 (factory default), or
as a mix of one alphabetic and one numeric character (for example, A1, B5, C9 and so forth). To change
the way the bed label is displayed:
Step
1
2
3
4
5
6

Enabling/Disabling Fixed Frequency

The Service Support Tool is required to set the base frequency. Fixed frequency selection can be enabled
on the base station, as follows.
Step
1
2
3
80
Action
Press the two arrow keys
blinks, the two-digit display goes blank.
Press three times to enter the 'F' settings. 'F' flashes in the
display.
Press . 'F1' appears, and the '1' blinks.
Press again. Two-digit display shows the current setting
(1.0=numeric characters only, 1.1=mixed alphabetic and numeric
characters)
Press or to change the setting.
Press to accept the new setting and return to normal
operation.
Action
Press the two arrow keys
blinks, the two-digit display goes blank.
Press three times to enter the 'F' settings. 'F' flashes in the
display.
Press . 'F1' appears, and the '1' blinks.
simultaneously. The bed label
simultaneously. The bed label
Function Settings
Display looks like...
Display looks like...