1 General Information
Antenna Extension Mounting Kit
If the base station is installed in a cart or other mounting solution where the standard antenna cannot be
attached directly to the base station, or does not provide sufficient transmission range, use the antenna
extension mounting kit (M2720A Option K01).
The kit contains:
• Antenna extension cable with BNC connectors (1.0m/3.3 ft. approx.)
• Mounting bracket, including fixings, for mounting onto Philips Carts.
The mounting bracket can also be fitted on walls, wooden carts, or other flat surfaces using fixings (not
supplied) appropriate for the surface material.
Mounting on Philips Carts
1
Remove the plastic cover (A).
Slide the fixings for the mounting bracket (C) into the groove (B) in the cart.
2
3
Replace the plastic cover (A) before sliding the mounting bracket fully down.
Slide the mounting bracket downwards in the groove (B) in the cart until the antenna holder part of the
4
bracket rests on the plastic cover.
5
Tighten the fixing screws to secure the mounting bracket.
10
To Purchase, Visit
Avobus.com
A
C
B
or call
1-800-674-3655
Antenna Extension Mounting Kit