Philips Avalon CTS M2720A Service Manual page 40

4 Disassembly/Reassembly
Then remove the two screws (B) for the fetal monitor interface socket using a 6mm socket driver.
3
Disconnect the multipin connector joining the MIF board to the receiver board by lifting the corner of
4
the MIF board nearest to the power supply cover.
5 Then lift the MIF board clear of the chassis assembly.
34
To Purchase, Visit Avobus.com
Screws (B)
or call 1-800-674-3655
Changing the Power Supply/Metal Chassis Assembly
Multipin connector
MIF board removed