Action Settings; Displaying The Software Revision; Clearing The Factory Information Code (Fic) Log - Philips Avalon CTS M2720A Service Manual

Action Settings

Action Settings
The action settings can be changed only on the base station. To change the action settings, follow the step-
by-step instructions.

Displaying the Software Revision

Step
1
2
3
4
5

Clearing the Factory Information Code (FIC) Log

Step
1
2
Action
Press the two arrow keys
blinks, the two-digit display goes blank.
Press twice to enter the 'A' settings. 'A' flashes in the
display.
Press . 'A1' appears, and the '1' blinks.
Press once to increment 'A' setting to 2.
Press . Two-digit display shows
the software revision, in the format
A.XX.XX, as a sequence. For example,
revision A.01.00 is shown in the
following way. This cycles for 30
seconds before the display reverts
back to normal.
Action
Press the two arrow keys
blinks, the two-digit display goes blank.
Press twice to enter the 'A' settings. 'A' flashes in the
display.
simultaneously. The bed label
Transducer display (if
docked)...
1
2
3
simultaneously. The bed label
8 Changing Settings
Base station display
looks like...
Base station display
shows sequence
Display looks like...
83