Test Type Required/Not Required - Siemens SINUMERIK 828D Function Manual

Figure 3-2
3.2.3.2

Test type required/not required

An acceptance test can be carried out for every safety function used on the machine. Not all
of the Safety functions listed in the dialog are used on the machine. In the acceptance test
wizard, you can set the acceptance test (test type) for individual Safety Functions to "required"
or "not required".
A test can be predefined using a customizing template. You can also hide test types from the
customized template as required.
SINUMERIK Operate acceptance test
Function Manual, 08/2018, A5E39460574B AC
3.2 SINUMERIK 828D/840D sl - drive-based Safety functions
Test type/setting area overview
Acceptance test wizard of SINUMERIK Operate
27