7. If an entry appears in the failure parts list window, click Show Details
in the lower right corner of the screen for detailed information (see
Figure
Troubleshooting based on LED indications
This section provides step-by-step procedures to help determine the cause
of failures that are indicated by the LEDs on the array. This section is
intended to be used along with
page
6-6.
Verify that a failure is recovered after taking the appropriate actions for the
following LED indications.
6–12
6-5). To remove the information, click Close.
Figure 6-5: Example of an Alarm Information Window
Troubleshooting
Hitachi AMS 2000 Family Storage System Service Guide
Table 6-2:LED Failure Indications, on