Table of Contents
Advertisement
Detaching the device from the top-hat rail
Requirement: Power supply, bus line and network connection are disconnected.
1.
Insert a screwdriver (see figure 26, item 1) into the release lever (see figure 26, item 2) and push
the release lever down (see figure 26, item 3).
2.
Take the device off the top-hat rail.
Figure 26: Detaching the device from the top-hat rail
Disposal
Make an active contribution to protecting the environment by disposing of all materials in an environ-
mentally-responsible way.
Packaging and box
Dispose of the packaging material appropriately, in a card, paper or plastic
recycling bins.
Device
Old devices must not be disposed of with domestic refuse!
You can dispose of your old device free of charge at designated collection facil-
ities or, if necessary, you can hand it in to your specialist dealer. Contact your
local authority for recycling details.
ISE SMART CONNECT KNX Panasonic
© 2019 ise Individuelle Software und Elektronik GmbH
Disassembly and Disposal
1-000C-000
S. 62 / 69
Advertisement
Table of Contents
