NEC Express5800/E120d-1 User Manual page 66

Chapter 2 Preparations
4. Remove the screw from the PCI riser
card and remove the blank cover..
5. Fix on the Riser Card with screw you
removed at step 3.
6. Remove the SAS/SATA cable from SATA
connector of Motherboard.
7. Connect SAS/SATA cable to RAID
Controller.
7-1. When four or less hard disk drives are installed:
Connect SAS/SATA cable removed in Step 6 to connector (Ports 0-3) on RAID Controller.
7-2. When five or more hard disk drives are installed:
Connect SAS/SATA cable removed in Step 8 to connector (Ports 0-3) on RAID Controller.
Connect K410-269(00)intaernal SAS/SATA cable of an option to connector (Ports 4-7) on RAID
Controller.
66
Note
Keep the removed blank cover for future use.
When installing N8103-156 Premium Feature Key in the N8103-151
Note
RAID controller, refer to the manual of a RAID controller.
Express5800/E120d-1 User's Guide
1. Installing Internal Optional Devices
PCI #1 side
PCI #2 side