NEC Express5800/E120d-1 User Manual page 88

Chapter 2 Preparations
5. When removing the rail from the rack, pull
the rail in the direction of the arrows while
pressing the lever.
(3) Removing Outer Rail
If multiple rails are installed, it might be impossible to push the unlock lever. If this happens, remove the rail
from the rack by using the following procedure.
1. Refer to Chapter 2 (2.1.2) - (2) Removal procedure to remove the server from the rack.
2. Prepare the designated tool to remove
slide rail (outer rail) that comes with the
server.
3. Insert the tool into the square hall at the
front of a rail as shown in the image on
the right.
88
Lever
Express5800/E120d-1 User's Guide
2. Installation and Connection
Square hall