Post Error Messages - NEC Express5800/E120d-1 User Manual

Chapter 3 Setup
<F4> key:
<F12> key: Boot from network.
6. If a controller which has its dedicated BIOS such as a RAID Controller board is installed, a message
that prompts you to start the dedicated utility to set each board is displayed.
Example: If an optional RAID Controller is installed
Press <Ctrl> <H> for Web BIOS
The utility starts by pressing <Ctrl> + <H> keys.
For details on the utility, refer to the manual supplied with each optional board.
Depending on the configuration, the message "Press Any Key" might appear to prompt a key entry.
This is a behavior of the BIOS of the optional board. Continue to operate after checking the manual
of the optional board.
7. The OS starts when POST is completed.
1.1.2

POST error messages

When POST detects an error, it displays an error message on the screen or beeps for some errors. For
descriptions of error messages, causes, and countermeasures, refer to Chapter 3 (1. POST Error
Message) in "Maintenance Guide".
Run Offline Tools. For information on Offline Tools, refer to Chapter 1 Maintenance (7.
Offline Tools) in "Maintenance Guide".
Note
Take notes on the indication displayed on display unit before consulting with your
sales representative. Alarm messages are useful information for maintenance.
Express5800/E120d-1 User's Guide
1. Turning on the Server
97