Fundamentals
2.9 Motion commands
Program code
N110 AP=IC(72)
N120 L10
N130 G0 X300 Y200 Z100 M30
See also
Overview (Page 188)
2.9.4
Rapid traverse movements
2.9.4.1
Activating rapid traverse (G0)
The traversing of the path axes at rapid traversing velocity is activated with the G command G0.
Syntax
G0 X... Y... Z...
G0 RP=... AP=...
Meaning
G0:
X... Y... Z...:
RP=... AP=... :
178
Comment
...
; Retract tool, end of program.
Traversing the axis with rapid traverse velocity
Effective:
Modal
Specifying the end point in Cartesian coordinates
Specifying the end point in polar coordinates
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
NC programming