Siemens SINUMERIK 840D sl Programming Manual page 213

ANG:
X1, Z1:
X2, Z2:
Syntax
X... ANG=...
Z... ANG=...
Meaning
X... :
Z... :
ANG:
Example
Program code
N10 X5 Z70 F1000 G18
N20 X88.8 ANG=110
N30 ...
or
Program code
N10 X5 Z70 F1000 G18
N20 Z39.5 ANG=110
N30 ...
NC programming
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
Angle of the straight line
Start coordinates
End point coordinates of the straight line
End point coordinate in the X direction
End point coordinate in the Z direction
Identifier for angle programming
The specified value (angle) refers to the abscissa of the active working plane (Z axis
with G18).
Comment
; Approach the starting position
; Straight line with angle specification
Comment
; Approach the starting position
; Straight line with angle specification
Fundamentals
2.9 Motion commands
213