Grinding Tools - Siemens SINUMERIK 840D sl Programming Manual

Fundamentals
2.5 Tool offsets
No.
220
230
231
240
241
242
250
Tool parameters
The following diagram provides an overview of which drill tool parameters are entered in the
compensation memory:
T
L1
Tool parameters
$TC_DP1
$TC_DP3
● Wear values corresponding to the requirements.
● Other values should be set to 0.
2.5.5.4

Grinding tools

The following tool types are available in the "Grinding tools" group:
400
401
402
403
410
411
412
413
490
74
Tool type
Center drill
Countersink
Counterbore
Tap regular thread
Tap fine thread
Tap Whitworth thread
Reamer
Tool carrier reference point
Length 1
Meaning
Tool type
Geometry - length 1
Surface grinding wheel
Surface grinding wheel with monitoring
Surface grinding wheel without monitoring without base dimension (TOOLMAN)
Surface grinding wheel with monitoring without base dimension for grinding wheel periph‐
eral speed GWPS
Facing wheel
Facing wheel (TOOLMAN) with monitoring
Facing wheel (TOOLMAN) without monitoring
Facing wheel with monitoring without base dimension for grinding wheel peripheral speed
GWPS
Dresser
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
NC programming