Toshiba Strata DK 16 Installation And Maintenance Manual page 271

STEP
1 Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 92
Press CR.
Enter 9.
3
Enter button/LED number 0 3.
4
5 Change LED 03 to "ON" by
entering Y.
6 Press SPACE.
7 Change LED 04 to "ON" by
entering Y.
Press CR.
8
Initialization complete.
NOTE: If program data is not entered correctly, CR will
not respond. To retry, press DELETE CR at the same time .
9 To exit this program, press # # CR.
IMPORTANT NOTE:
This program clears Call Forward memory for all stations, but does not reset the Call Forward
indication on the station (Call Forward LCD information and/or Call Forward button/LED). To
clear station Call Forward indications, system power must be turned OFF for five seconds, then
ON. Fixed Call Forward is not cleared by this program.
REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
TABLE RM-J
PROGRAM 92 (continued)
CALL FORWARD BACKUP RAM INITIALIZATION
ACTION
-21-
SECTION 100-816-600
MARCH 1993
DISPLAY/PRINTOUT
>MODE PROG
P 92
P92
P92
P92 9
P92
P92 9 03 N
P92
P92 9 03 N Y
P92
P92 9 03 N Y
04 N
P92
P92 9 03 N Y
04 N Y
P92
P92 9 03 N Y
04 N Y
P92