Toshiba Strata DK 16 Installation And Maintenance Manual page 274

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
STEP
1 Enter the Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 01
Press CR.
3 Enter the Physical Port Number
Enter the desired physical port number.
Example: Port number 01, enter 0 1.
4 Verify Physical Port's Associated Logical Port
5 To Display More Ports/Exit Program
A) To display more logical ports, press CR and go to Step 3.
B) To exit this program, enter # # CR (twice).
STEP
1 Enter the Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 02
Press CR.
3 Enter the Logical Port Number
Enter the desired logical port number.
Example: Port number 02, enter 0 2.
4 Verify Logical Ports Associated Physical Port
5 To Display More Ports/Exit Program
A) To display more physical ports, press CR and go to Step 3.
B) To exit this program, enter # # CR (twice).
TABLE RM-M
PROGRAM 01
LOGICAL PORT DISPLAY
ACTION
TABLE RM-N
PROGRAM 02
PHYSICAL PORT DISPLAY
ACTION
-24-
DISPLAY/PRINTOUT
>MODE PROG
P
P 01
P01
P01
P01 01
Logical Port Displays
Physical Port
P01 01 ( = Logical Port)
P01 01 ##
P01 ##
P
(after exit)
DISPLAY/PRINTOUT
>MODE PROG
P
P 02
P02
P02
P02 02
Physical Port Displays
Logical Port
P02 02 ( = Physical Port)
P02 02 ##
P02 ##
P
(after exit)