Toshiba Strata DK 16 Installation And Maintenance Manual page 293

STEP
1 Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 93
Press CR.
3 Enter Action Code 1
Refer to the System Record Sheet and enter the appropriate
CO line number.
Example: CO line 2, enter 0 2.
The system will display previously entered identification
characters (up to 16 characters).
4 Refer to the System Record Sheet and change identification
if required: . . . . . . . . . .
Example: OVERSEAS.
5 To Exit Program/Store Data
A) To store data, press CR.
B) Continue returning to step 3 until all data has been entered
for this program.
C) To exit this program, press # # CR.
NOTE:
Use SPACE to clear characters.
REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
TABLE RM-AM
PROGRAM 93
CO LINE IDENTIFICATION
ACTION
(16 characters maximum).
-43-
SECTION 100-816-600
MARCH 1993
DISPLAY/PRINTOUT
>MODE PROG
P
P 93
P93
(up to 16)
P93 1 02
Current I.D.
(up to 16)
P93 1 02
OVERSEAS
(up to 16)
P93 1 02
OVERSEAS
P93 ##
P