Huawei PowerCube 5000 Installation Manual page 83

PowerCube 5000 (SUN2000-150KTL-S0)
Installation Guide
Table 9-8 Changing the language
Path
System Info > Settings >
Basic
Step 4 Set the parallel ID.
Table 9-9 Setting the parallel ID
Path
System Info >
Settings > Basic
Param.
Step 5 Set the monitor parallel IP address.
Table 9-10 Setting the monitor parallel IP address
Path
System Info >
Settings >
Communication
Step 6 Set NetEco configuration parameters.
Issue 03 (2020-04-10)
After the MDU language is changed, the LUI language will automatically switch to the language set on
the LUI at the same time.
In the case of multiple parallel scenarios in the same LAN, you need to set the two parallel cabinets to a
unified parallel identifier to distinguish the parallel status of the cabinets.
Parameter
Parallel ID
In the parallel scenario, you need to set the monitor parallel IP address. The IP addresses of the master
and slave devices must be in the same network segment.
Parameter
Monitor Parallel IP
Address
In a parallel system, this parameter needs to be set only for the master unit.
Copyright © Huawei Technologies Co., Ltd.
Parameter
Set Local LUI Language
Default Value
-
Default Value
192.168.023.200
9 Power-on and Commissioning
Setting
Select a desired language.
Setting
'a~z', 'A~Z', '0~9', '_'
(Max. 15
Characters)
Setting
Set this parameter
based on the address
assigned by the
network
administrator.
77