Huawei eSpace 6805 Administrator's Manual page 128

eSpace 6805 IP Phone
Administrator Guide
Figure 6-46 Wireshark: Capture Options page
Main areas on the Wireshark: Capture Options page are described as follows:

After the Wireshark is installed, the system automatically generates a logical network adapter.
In addition to the logical network adapter, a physical network adapter is required, as shown in
Figure
especially for a host with multiple network adapters. A physical network adapter will be
displayed in the drop-down list box only after the WinPcap is installed.
Issue 01 (2014-01-06)
Capture
− Interface
Specifies the network adapter for capturing packets.
6-46. During the actual packet capture, select a correct physical network adapter,
− Capture Filter
Specifies the filter criteria. The Wireshark captures only the packets that comply with
the filter criteria. For example, if Capture Filter is set to host 10.138.5.10, only
packets sent and received by the host whose IP address is 10.138.5.10 will be
captured.
Table 6-5 describes the filter criteria categories specified by Capture Filter.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Appendix
126