Common Operation Configurations; Configuring Line Keys - Huawei eSpace 6805 Administrator's Manual

eSpace 6805 IP Phone
Administrator Guide
4.
5.

3.4 Common Operation Configurations

3.4.1 Configuring Line Keys

eSpace 6805 supports the BroadSoft SCA function that is used to implement the line sharing
function by interacting with the server. That is, two or more numbers in different area can be
bound. If one line is in use, other lines are disabled. When an incoming call comes, all phones
that share the line, however, ring at the same time. To enable this function, you must set the
line key mode. Select a required line key on the Settings>Programmable Keys page. Set
Mode to Shared Line and specify an account for sharing, as shown in
Figure 3-40 Configuring line keys
Table 3-30 Multi-purpose keys
Function
Issue 01 (2014-01-06)
Figure 3-38 Upgrade Via
Set Disable DHCP Option 248 to Yes.
If the parameter is set to No, the phone is allowed to obtain the firmware upgrade server
address when obtaining an IP address through the DHCP server. The configuration is
performed on the DHCP server. The obtained firmware upgrade server address
overwrites the value of Firmware Server Path set in
Figure 3-39 Set DHCP Option43 and Option66 to override server
Click Save and Apply.
If a new version is detected, the IP phone automatically upgrades the version.
----End
Description
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration and Loading Files
Step
Setting
Account Name
3.
Figure 3-40.
UserID
51