Configuring And Upgrading Ip Phones In Batches; Technique Introduction - Huawei eSpace 6805 Administrator's Manual

eSpace 6805 IP Phone
Administrator Guide
4
Configuring and Upgrading IP Phones in

4.1 Technique Introduction

In the technology of configuring and upgrading IP phones in batches, an IP phone uses the
configuration file downloaded from the server through HTTP. The auto provisioning system
(APS) has the following features:


4.2 Configuring and Upgrading IP Phones


eSpace 6805 IP phones can be configured and upgraded in batches. The basic principle is as
follows:
Issue 01 (2014-01-06)
All IP phones use the same configuration file.
The configuration file applies to all IP phones. The administrator does not need to
configure a unique configuration file for each IP phone.
An IP phone determines whether to perform upgrade according to the verification
mechanism.
The verification mechanism is designed for an IP phone before the IP phone downloads
the configuration file and upgrades the version file. If the configuration file and version
file on the server are different from that on the IP phone, the IP phone synchronizes the
files from the server. If the configuration file and version file of the IP phone on the
server are the same as that on the IP phone, the IP phone skips upgrade and is started
normally.
Ensure the power supply of an IP phone during the upgrade. Otherwise, result in upgrade
failed.
The file lists contained in the programs for software upgrade and new installation are the
same. Use the compressed package for upgrade. Upgrade the software after decompressing
the package in the actual situation.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

4 Configuring and Upgrading IP Phones in Batches

Batches
63