Manual Upgrade - Huawei eSpace 6805 Administrator's Manual

eSpace 6805 IP Phone
Administrator Guide




Manual Upgrade

When you manually upgrade the IP phone version on the Web configuration page, do as
follows:
1.
2.
3.
4.
Issue 01 (2014-01-06)
Ensure the power supply of an IP phone during the upgrade. Otherwise, result in upgrade
failed.
The file lists contained in the programs for software upgrade and new installation are the
same. Use the compressed package for upgrade. Upgrade the software after decompressing
the package in the actual situation.
To ensure network security, you are advised to use HTTPS for the phone upgrade.
Disable automatic upgrade. On the Maintenance > Upgrade and Provisioning page,
select No for Automatic Upgrade.
Figure 3-32 Set Automatic Upgrade
Enable version check. On the Maintenance > Upgrade and Provisioning page, select
Always Check for New Firmware for Firmware Upgrade and Provisioning.
Figure 3-33 Firmware Upgrade and Provisioning
Set the mode of eSpace 6805 and the upgrade server. Select HTTP in Upgrade Via and
enter the HTTP server address in the Firmware Server Path text box, namely, IP
address of the computer where loading files are stored. The domain name and IP address
are supported.
Figure 3-34 Upgrade Via
Set Disable DHCP Option 248 to Yes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration and Loading Files
49