Obtaining Device Information By Observing The Status Indicators And Screen; Common Faults And Fault Analysis - Huawei eSpace 6805 Administrator's Manual

eSpace 6805 IP Phone
Administrator Guide
5.1.3 Obtaining Device Information by Observing the Status
Indicators and Screen
Observing the Status Indicators
The status indicators on eSpace 6805 IP phones are the LINE, LAN, PC, Message, and
SPEEDDIAL/BLF/Presence indicators.
Table 5-1 Description of IAD101(102)E status indicators
Indicator
LINE
LAN
PC
Message
Indicator
SPEEDDIAL
Indicator

5.2 Common Faults and Fault Analysis

5.2.1 Obtaining the MAC Address When the IP Phone Is Powered
Off
You can obtain the MAC address through either of the following ways:

Issue 01 (2014-01-06)
Color
Green
Red
Green
Green
Green
Green
According to the corresponding purchase order (PO), you can request the supplier to
provide the delivery information table that contains the MAC address.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 5-1 describes the status indicators.
Status Description
On The IP phone line is in use.
Blink The call of this IP phone line is held.
Off The IP phone is in hang-off state.
On The IP phone line is unavailable.
Blink The IP phone is ringing.
Blink The IP phone is sending or receiving data.
On A LAN connection is set up.
Off No LAN connection is set up.
Blink The computer is sending or receiving data.
On A PC connection is set up.
Off No PC connection is set up.
Blink A new message to the IP phone exists on the
server.
Off No new message to the IP phone exists.
On The fast dialing function is in use.
Off The fast dialing function is not used.
5 Troubleshooting
70