Yamaha YZF-R1 Series Service Manual page 244

TIP
Tighten the damper rod assembly with the
damper rod holder "1".
Damper rod holder (ø30)
90890-01506
Damper rod holder
YM-01506
3. Lubricate:
• Inner tube's outer surface
Recommended oil
Yamaha Suspension Oil 01
4. Install:
• Dust seal "1" New
• Oil seal clip "2"
New
• Oil seal "3"
New
• Washer "4"
• Outer tube bushing "5"
• Inner tube bushing "6"
ECA19170
NOTICE
Make sure the numbered side of the oil seal
faces bottom side.
TIP
• Before installing the oil seal, lubricate its lips
with lithium-soap-based grease.
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag to protect
the oil seal during installation.
1
New
New
4-95
FRONT FORK (for YZF-R1)
4
5
6
G088922
5. Install:
• Outer tube
(to the inner tube)
6. Install:
• Outer tube bushing "1"
• Washer "2"
(with the fork seal driver "3")
Fork seal driver
90890-01442
Adjustable fork seal driver (36–46
mm)
YM-01442
3
2
1
G088923
7. Install:
• Oil seal "1"
(with the fork seal driver "2")
Fork seal driver
90890-01442
Adjustable fork seal driver (36–46
mm)
YM-01442
3
1
2