Yamaha YZF-R1 Series Service Manual page 303

Removing the camshafts
10 N ・ m (1.0 kgf ・ m, 7.4 lb ・ ft)
1
LT
2
Order Job/Parts to remove
Crankshaft end cover/Timing mark accessing
bolt
1 Timing chain tensioner
2 Timing chain tensioner gasket
3 Camshaft cap 1
4 Camshaft cap 2
5 Intake camshaft
6 Exhaust camshaft
8 N ・ m (0.8 kgf ・ m, 5.9 lb ・ ft)
4
5
6
'
Q ty
Refer to "GENERATOR" on page 5-44.
1
1
• If the camshaft cap bolt is a new one, it is
not necessary to apply engine oil onto the
mating surface and threads of the bolt.
4
• If the camshaft cap bolt is a new one, tight-
en it to 10 N
• If the camshaft cap bolt is a new one, it is
not necessary to apply engine oil onto the
mating surface and threads of the bolt.
1
• If the camshaft cap bolt is a new one, tight-
en it to 10 N
1
1
5-20
CAMSHAFTS
8 N ・ m (0.8 kgf ・ m, 5.9 lb ・ ft)
E (4)
(4)
E
(4)
(4)
(4)
3
3
M
F W F W
D D
M
Remarks
· · ·
m (1.0 kgf m, 7.4 lb ft).
· · ·
m (1.0 kgf m, 7.4 lb ft).