Yamaha YZF-R1 Series Service Manual page 248

• Handlebar bolt "2"
Handlebar bolt
7 N·m (0.7 kgf·m, 5.2 lb·ft)
• Handlebar pinch bolt "3"
Handlebar pinch bolt
32 N·m (3.2 kgf·m, 24 lb·ft)
• Upper bracket pinch bolt "4"
Upper bracket pinch bolt
26 N·m (2.6 kgf·m, 19 lb·ft)
3
TIP
When installing the front fork legs, make sure
that the spring preload adjusting nuts are posi-
tioned at the angles shown in the illustration.
55-65°
4. Check:
• Cable routing
TIP
Make sure the brake hose, throttle cables, clutch
cable, and handlebar switch leads are routed
properly. Refer to "CABLE ROUTING" on page
2-17.
5. Adjust:
• Spring preload
• Rebound damping
• Compression damping
Refer to "ADJUSTING THE FRONT FORK
LEGS (for YZF-R1)" on page 3-21.
2
1
4
55-65°
4-99
FRONT FORK (for YZF-R1)