Frigidaire FFLE3911QW Technical & Service Manual page 111

NOTE
To separate the motor from the Blower Assembly,
follow these steps:
Step: 9
Loosen the screws (6) to remove the Front housing of the
Blower.
Step: 10
Remove the clamp that tightly holds the snaps of the Blower
wheel with the Motor shaft.
Step: 11
Detach the Blower wheel snaps to separate the Blower
wheel from the Motor shaft.
Step: 12
Loosen the screws (2) to remove the Motor and Cradle
Assembly from the Blower rear housing.
Step: 13
Remove the Motor clamps (2) with the help of the Plier,
from the Cradle projection as shown in Figures (6 and 7).
110