CHAPTER 5 MECHANICAL CONSTRUCTION
5.
Removing the Tray Assembly
1) Remove the rear cover. (See I-A-2.)
2) For the Saddle Finisher, remove the rear
lower cover also. (See II-A-2.)
3) Disconnect J201 [1] and the grounding wire
[2], and release the harness stop [3].
4) Remove the slide guide [4].
5) Remove the end cap (F) [5] and the end cap
(R) [6].
6) Lift the tray assembly [7] to remove it.
5-4
[1]
Figure 5-106
[6]
[7]
Figure 5-107
[2]
[3]
[4]
[5]