Removing The Feed Drive Unit - Sharp AR-FN8 Service Manual

9) Remove the three screws [5] and slide out
the swing unit [6] towards you.
Remove the swing unit.
2.

Removing the Feed Drive Unit

1) Remove the finisher controller PCB. (See
I-C-1.)
2) Remove the harness leads [2] from the two
harness stops [1] at the PCB base and dis-
connect the two connectors [3].
CHAPTER 5 MECHANICAL CONSTRUCTION
[5]
[5]
Figure 5-114
[3]
Figure 5-115
[6]
[1] [2] [1]
[5]
5-9