Sharp AR-FN8 Service Manual page 26

CHAPTER 1 GENERAL DESCRIPTION
4) Push the blue knob and pull out the empty
staple case.
Figure 1-311
5) Set a new staple case.
Figure 1-312
Reference:
You may set no more than one staple cartridge
at a time.
Make sure that the new cartridge is one
specifically designed for the finisher unit.
* Do not tear off the seal which fixes the
staples before setting them in the car-
tridge.
1-18
6) Pull the length of tape (used to hold the
staples in place) straight out.
Figure 1-313
7) Set the staple cartridge.
Figure 1-314
8) Push in the stapler unit completely until it
stops and turn the blue knob clockwise to
lock it and close the front door.
Figure 1-315