Using The Machine; Removing Paper Jams From The Finisher Unit - Sharp AR-FN8 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
IV. USING THE MACHINE
A. Removing Paper Jams
from the Finisher Unit
If the host machine indicates the finisher pa-
per jam message, perform the following to re-
move the jam.
1) Holding the latch lever down as shown,
move it to detach it from the host machine.
Figure 1-301
2) Remove any jam visible from the outside.
Figure 1-302
1-16
3) Open the upper cover and check the inside
of the finisher.
Figure 1-303
4) Lift the buffer roller cover and remove the
jam.
Figure 1-304
5) Lift the buffer roller and remove the jam.
Figure 1-305