Removing The Led Pcb; Pcbs - Sharp AR-FN8 Service Manual

C.

PCBs

1.

Removing the LED PCB

1) Remove the punch unit assembly. (See III-
B-3.)
2) Remove the screw [1] and the LED PCB
[2].
2. Removing the Photosensor PCB
1) Remove the upper cover. (See III-A-2.)
2) Remove the screw [1] and take out the sen-
sor bracket [2].
3) Disconnect the connector [3] and remove
the photosensor PCB [4].
CHAPTER 5 MECHANICAL CONSTRUCTION
Figure 5-312
Figure 5-313
[2]
[1]
[4]
[3]
[2]
[1]
5-39