Removing The Stapler - Sharp AR-FN8 Service Manual

4.

Removing the Stapler

1) Open the front cover, and move the stapler
assembly to the front.
2) Remove the screw [1], and slide out the sta-
pler assembly [2].
3) Remove the right front cover [1] (2 screws).
4) Remove the stepped screws (2 pcs.) which
support the stapler unit.
5) Disconnect the connector [4] of the stapler
assembly [3] and the ring terminal of the
earth cable.
CHAPTER 5 MECHANICAL CONSTRUCTION
Figure 5-122
Figure 5-123
[3]
Figure 5-124
[1]
[4]
5-13