CHAPTER 5 MECHANICAL CONSTRUCTION
B.
FEEDING SYSTEM
1.
Removing the Swing Unit
1) Remove the tray assembly. (See I-A-5.)
2) Remove the grate-shaped upper guide. (See
I-A-6.)
3) Remove the grate-shaped lower guide. (See
I-A-7.)
4) Remove the harness from the two harness
stops [1] and disconnect the four connec-
tors [2].
5) Remove the screw [3] and take out the sta-
pler stay holder [4].
6) Open the front door.
7) Slide the stapler unit to the center position.
8) Remove the spring [7] in the front side.
5-8
[1]
[2]
Figure 5-113
[7]
Figure 5-113a
[4]
[3]