Table of Contents
Advertisement
Operation
Setting the Software Switch (CSTM)
24(E)
The software switch (CSTM) represents a 4-byte hexadecimal value. Bit 2
is for setting the Auto Cleaning function, and bit 1 and bits 4 to 7 are for
setting the Special Eject Auto Cleaning function.
bit 0: SCSI parity check (do not change the setting)
0: ON
1: OFF
bit 1: For setting the Special Eject Auto Cleaning function
0: OFF
1: ON
bit 2: For setting Auto Cleaning mode
0: OFF
1: ON
bit 3: Reserved (do not change the setting)
bits 4 to 7: For setting the bin number of the cleaning cassette
0: BIN9 (default)
1 to 9: BIN1 to BIN9
A to F: BIN9
bit 8: Move Complete After GY loading (do not change the setting)
0: OFF
1: ON
For details, refer to "Move Medium" in the protocol manual.
bit 9: Immediate Read GY Element Status (do not change the setting)
0: OFF
1: ON
For details, refer to "Read Element Status" in the protocol manual.
bit 10: Hide Cleaning Cassette (do not change the setting)
0: OFF
1: ON
For details, refer to "Read Element Status" in the protocol manual.
bit 11: Reserved (do not change the setting)
bits 12 to 19: Changing the auto cleaning period (default 00)
FF to 33: 50 hours
32: 50 hours
31: 49 hours
30: 48 hours
2F: 47 hours
28: 40 hours
27 to 01: 40 hours
00: 50 hours
bits 20 to 31: Reserved (do not change the setting.)
Advertisement
Table of Contents
