Table of Contents
Advertisement
Warning Indications
If a warning error occurs during a normal operation,
the warning status appears on the display panel.
>IN USE
C
*
↑
↑
Status display Warning code (flashing)
The contents of warning codes are as follows:
Display just after Display Contents
an error occurs
appears
later
>[W] PS FAIL
– –
P
*
>[W] OVER HEAT
– –
*
H
>[W] FAN FAIL
– –
A
*
>[W] Auto CL FAIL – –
E
*
>[W] RQ FM TAPE – –
F
*
>[W] RQ CL TAPE – –
C
*
>[W] SpcEjctDrv.
– –
S
*
(none)
– –
1
*
(none)
– –
Q
*
Note
The higher warning indication in the table above has
the priority over the lower one when it is displayed.
Power supply block fail
Refer to Sony service
representative.
Over heat of power block
Refer to Sony service
representative.
Cleaning fan stop
Refer to Sony service
representative.
Special eject auto cleaning fail
See "Special Eject Auto
Cleaning Function."
Original tape request
See "Special Eject Auto
Cleaning Function."
Cleaning tape request
See "Special Eject Auto
Cleaning Function."
Special Eject being performed
See "Special Eject Auto
Cleaning Function."
A tape streamer requires a
cleaning tape.
Refer to the operation manual
supplied with the tape streamer.
Inconsistency of the firmware
version
Refer to Sony service
representative.
31(E)
Advertisement
Table of Contents
