Table of Contents
Advertisement
CSTM value (hexadecimal)= 000 00 0 8 6
Do not change.
Cleaning period
Bin where a cleaning tape is set (1 to 9).
(0 indicates default setting: BIN9.)
0: Special Eject Auto Cleaning OFF, Auto Cleaning OFF
2: Special Eject Auto Cleaning ON, Auto Cleaning OFF
4: Special Eject Auto Cleaning OFF, Auto Cleaning ON
6: Special Eject Auto Cleaning ON, Auto Cleaning ON
To change the settings, follow the steps below:
1
Enter CUSTOM 1 and press the Return key on the host computer.
2
Enter the value on the line of the software switch (CSTM) to be
changed, and press the Return key.
For other lines, just press the Return key (see below).
3
When "Are you sure? (c/y/n)" appears, enter y and ↵.
4
When "I'm writing to flash memory...done!" appears, set the POWER
switch on the DMS-B9 to OFF, then ON again.
For example, to set the Special Eject Auto Cleaning function and Auto
Cleaning function to ON and set a cleaning cassette in Bin 8, you would
input as follows:
RUNNING>
RUNNING>CUSTOM 1 ↵
==<SET UP VENDOR VALUE>=============
:[SONY ]> ↵
Vendor Name
Vendor Name
:[SONY ]
:[DMS-B9 ]> ↵
Machine Name
Machine Name
:[DMS-B9 ]
Vendor ROM Version :[1.20]> ↵
Vendor ROM Version :[1.20]
Vendor ROM Revision :[Rel.1.20.00]> ↵
Vendor ROM Revision :[Rel.1.20.00]
Software switch (CSTM):[00000000]>00000086
Software switch (CSTM):[00000086]
=====================================
Are you sure? (c/y/n) >y ↵
I'm writing to flash memory...done!
Do not change.
←Not changed
←Not changed
←Not changed
←Not changed
←
Special Eject Auto
Cleaning function
and Auto Cleaning
function are set to
ON, and BIN 8 is
designated for a
cleaning tape.
25(E)
Advertisement
Table of Contents
