How To Import A Certificate And A Key - Huawei NetCol5000-C030H90D0 User Manual

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual (2019)
Step 8 After the file is imported successfully,
Figure 7-29 Importing the file successfully
Step 9 Tap Maint > USB Operations > Remove USB to remove the USB flash drive.
----End

7.1.19 How to Import a Certificate and a Key

Prerequisites
You have obtained CA certificate file, local certificate file, and key file into a
USB disk that is connected to the USB port located on the main control module
and has been recognized.
You are advised to use the FAT32 USB flash drive with a capacity no greater than
64 GB. Format the non-FAT32 USB flash drives into FAT32 ones before using them.
● Ensure that the key file has been encrypted using AES128.
● Before using a USB flash drive, ensure that its data has been scanned by
antivirus software and is secure.
Procedure
Step 1 On the home page, choose Maint > USB Operations > Import Certificate, as
shown in
Issue 03 (2020-08-30)
NO TE
If the file fails to be imported, a failure message will be displayed.
NO TICE
Figure 7-30.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-29 is displayed. Then tap Finish.
7 FAQ
186