Hitachi Hidic EH-150 Applications Manual page 22

Preliminary Rev.03
5.3.2 IP address setting
The setting procedure for this module IP address and the destination station IP address for test is described
here.
(1) Displaying "IP address display frame"
Firstly, select the "IP address link selection" of menu frame then the operation frame changes to the "IP
address display frame". The current IP address information is displayed onto the "IP address display frame".
"IP address display frame" is shown in figure 5.6.
(2) Displaying "IP address setting frame"
Secondly, select the "Setting link selection" of "IP address display frame" then the operation frame changes to
the "IP address setting frame". "IP address setting frame" is shown in figure 5.7. And the items which can be
set by this setting frame are also shown in table 5.7.
The contents of this manual might be changed without notice.
Chapter 5 Configuration and procedure for starting communication
Figure 5.6 IP address display frame
5-6