Hitachi Hidic EH-150 Applications Manual page 26

Preliminary Rev.03
The list of error code is shown in table 5.9.
Error
Code
Operation mode: Is not Ethernet information
1001
setup mode.
Own station address: IP address is incorrect.
1101
Own station address: Subnet mask is
1102
incorrect.
Own station address: Default Gateway
1103
address is incorrect.
Own station address: IP address or Subnet
1104
mask is incorrect.
Routing information (No. n
1105
Subnet mask is incorrect.
Routing information (No. n
1106
is incorrect.
Routing information (No. n
1107
address is incorrect.
Test mode: IP address is incorrect.
1201
Test mode: Port No. is incorrect.
1202
*1 : n should be in 1 to 6.
The contents of this manual might be changed without notice.
Chapter 5 Configuration and procedure for starting communication
Table 5.9 The list of error code during the IP address setting
Display comment
*1
): IP address or
*1
): Subnet mask
*1
): Gateway
The position of dip switch is not for "Ethernet information
setting mode".
- Illegal value or character is set for IP address.
- "0.0.0.0" or "255.255.255.255" is set for IP address.
- Illegal value or character is set for Sub Net mask.
- The out of value of "255.0.0.0" to "255.255.255.248" is set
for Sub Net mask.
- Illegal value or character is set for Default Gate way
address.
- The out of value of "255.0.0.0" to "255.255.255.248" is set
for Sub Net mask.
- "0.0.0.0" or "255.255.255.255" is set for IP address.
"0.0.0.0" or "255.255.255.255" is set for IP address.
"0.0.0.0" or "255.255.255.255" is set for IP address.
5-10
Causes