Download Print this page

Hitachi Hidic EH-150 Applications Manual page 33

Ethernet module
Hide thumbs Also See for Hidic EH-150:

Advertisement

Preliminary Rev.03
5.5
The configuration of Automatically Sending and Receiving (ASR)
information
There are 3 kinds of configuration items of Automatically sending and Receiving information and these are
shown in table 5.5.1.
Class
1
ASR general setting
2
Connection type
3
Setting the sending and
receiving I/O area
5.5.1
General configuration of ASR
The procedure of configuration for the timeout of Automatically Sending and Receiving and the usage of
ATR bit. This value is used commonly by all connections of Automatically Sending and Receiving.
(1) Displaying of "Automatically Sending and Receiving information display window"
Firstly, select the "General info. link selection" of menu frame then the operation frame changes to the
"Automatically Sending and Receiving information display window". The current configuration is displayed
onto the "Automatically Sending and Receiving information display window". "Automatically Sending and
Receiving information display window" is shown in figure 5.5.1.
Figure 5.5.1 Automatically Sending and Receiving information display window
(2) Displaying of "Automatically Sending and Receiving information configuration window"
Secondly, select the "Setting link selection" of "Automatically Sending and Receiving information display
window" then the operation frame changes to the "Automatically Sending and Receiving information
configuration window". "Automatically Sending and Receiving information configuration window" is shown
in figure 5.5.2. And the items which can be set by this configuration window are also shown in table 5.5.2.
The contents of this manual might be changed without notice.
Chapter 5 Configuration and procedure for starting communication
Table 5.5.1 The classification of ASR information
Outline
These are used for Automatically sending and receiving commonly.
To set the connection type for each automatically sending and
receiving connections
To specify the sending or receiving I/O area to use by each
connection of Automatically Sending and Receiving.
Description
5-17

Advertisement

loading

This manual is also suitable for:

Eh-eth